interfaceIT™ Management Control System Release Notes ---------------------------------------------------- Version 2.3.150 Added support for a new relay module (HIO-RELAY-8) Minor graphics updates Fixed an issue with the core controller faulting Version 2.3.149 Fixed a bug when recording keystrokes that are a menu short cut Added support for new modules Version 2.3.148 Fixed a visual issue showing the second blank when field Added a precision field to the expression's to allow for specifing decimal points (Pn: as a prefix, IE: P1:#/10) Fixed an issue with the 7 segment displays showing the non calculated / expression value Version 2.3.147 Fixed an issue with the A320-OH-ELECT-DISP Fixed an issue with the expression Added a loading board message to the title due to the load times (and refresh) with many boards connected Fixed an alignment issue with the blank when entry Version 2.3.146 Added a second blank when value to allow for value 1 OR value 2 to blank the displays Added support for the FDS-GM1 board Version 2.3.145 Updated missing controller graphic Updated mismatch on OE1 layout and documentation. Version 2.3.144 Fixed a cosmetic issue with the FDS-OM1 module Version 2.3.143 (beta team version) Added support for the FDS-OE1 board Version 2.3.142 Fixed an issue with newly created items using FSUIPC getting an unknown type assigned Updated FSUIPC data types to show size as well as name to match what others are calling them Version 2.3.141 Fixed the blank when issue with negative numbers Version 2.3.140 (beta team version) Updated FSUIPC offset type names Fixed an potential issue if multiple resend switch internal variables are defined Updated GUI to show board and type in red if an action was changed Added automatic closing messages Updates configuration for internal variable switch resend Added automatic updating of old internal variable switch resend configuration Fixed a FSUIPC connected information message from showing as an error Version 2.3.139 (internal version) Issues where if FSUIPC was not connected (or wideclient) the console would start to freeze Issue where if FSUIPC was not connected switching from the FSUIPC monitor would crash Version 2.3.138 (internal version) Fixed an issue with the menu not showing the sected menu item data Fixed an issue where a bad FSUIPC offset doesn't show in the page monitor Added the ability to have a internal variable be timed (on for a duration and then automatically off) Fixed an issue where the FDS-OM1 board was not detecting switches 65-128 Version 2.3.137 (internal version) Internal build process migrated to new build and code system. Added support for the new FDS-OM1 board Version 2.3.136 (limited beta release) Fixed an issue with sending Shift/Alt/Control keys sequences thru FSUIPC Updated the Unknown data type encountered message to show the FSUIPC offset that is causing the issue Fixed an issue where "Clear Actions" was enabled on the root interfaceIT object Updated the keystroke windows to show is a key down and a is a key up Removed FS Assigned column from detailed controller view (never implemented) Not all tool tips were showing on hover over menu items Fixed an issue with status messages disappearing to quickly Optimized the status bar code and fixed a potential crash condition Added a series of icons to the status messages to allow for categories (error, info, success, etc) Added a Status Message History toolbar (View | Toolbars) to view the last 50 messages based on categories Updated the status bar to not display menu or button tips Fixed a cosmetic issue when launched minimized a window appeared in the task bar vs just the tray icon. Added a search function to find port on any module by name. Updated the task bar code Added some fatal controller read / write logging Version 2.3.135 (internal test build) Fixed an issue with FSUIPC data not observing the min and max limits Fixed an issue where the FSUIPC monitor thread was not always connecting to FSUIPC Core controller updates to prevent thread collisions while reading the controllers Fixed an issue with the LED outputs not working correctly (bug that showed up in .132) Version 2.3.134 (internal test build) Updated performance on the output monitor thread Fixed an issue in unique conditions where FSUIPC was not loading during startup Fixed a bug where on initial load FSUIPC updates were not always being sent Changed the enable/disable of FSUIPC to require a restart to prevent some crashes Fixed an issue where some DLL's were not digitially signed Version 2.3.133 (internal test build) Added support for the Boeing Inertial Reference System panel Version 2.3.132 (beta release) Fixed an issue where FSUIPC was not connecting during startup Fixed an issue where the blank with was being checked after the calculation - now it is before Fixed a crash on board reload if SimConnect was enabled Removed old toolbar menu items Version 2.3.131 (beta release) Fixed an issue where 7 Segment displays were not blanking properly based on the blank when value Fixed an issue when FSUIPC was disabled it still tried to send a message during shutdown Fixed an issue when FSUIPC was disabled it would still load in the monitor page Fixed an issue when FSUIPC was disabled it would still try to get the FS version Added the ability to dynamically enable/disable the FSUIPC option without having to refresh/restart Increased the performance on the FSUIPC montior page Added support for the A320 Pedistal board Added support for the A320 Overhead Electrical Display board Added support for the A320 ECAM board Added the ability to update a internal variable value from the internal variable monitor Version 2.3.130 Fixed a costmetic issue with the IIT-HRI-8 board name Increased the performance on the switch inputs Added addition error checking and logging around port and module import Fixed a crash during startup on machines with high hard drive activity Added additional context menu item icons Version 2.3.129 (internal release) Fixed an potential crash issue when wither AST or Sim-Avionics configuration files are not correct Updated the chooser dialog for AST and Sim-Avionics to how partial data that was read if a read error occures Fixed some alignment and cosmetic issues with the download configuration files dialog Version 2.3.128 (internal release) Fixed an issue where the board import was not reading the description or optional flags Added the ability to set the description when exporting a complete board Fixed a bug in the view toolbar items that prevented the state from showing Updated the window styles Updated application icons Added additional menu icons Removed the toolbars for turning off LED test and Identify Added a message to prompt to turn off identify when you are switching items Fixed a menu item issue when right clicking an item that was not selected Version 2.3.127 (internal release) Added a description field to the board import modules Added the ability to check the board import description Added the ability to blank 7 segment displays based on display value (737 electrical panel) Fixed an issue with initial board load not sending the switch off position correctly Version 2.3.126 (internal release) Core controller update - issue when multiple interfaceIT products are installed on the same machine. Optimized the code that reads the board information Fixed an issue with a mutex not being board specific Fixed a memory copy issue which sometimes prevented board modules from loading Version 2.3.125 (internal release) Updated some logging around device change Updates some code around the device change to help track down a potential bug Updated the module menu to determine if it needs output items Updated the module menu to determine if it needs input items Version 2.3.124 Updated issue with the version number and updater Core USB controller code updated Version 2.3.123 Added some debuging in the menu functions Version 2.3.122 Fixed a bug where the LED and Switch mode were always enabled Fixed a bug which could cause a crash when "Locate Input Mode" is enabled. Fixed a bug that was only allowing Sim-Avionics values to be 3 digits Added support for the IIT-RELAY-8 board Added support for the IIT-HI-128 board Added support for the IIT-HIO-32-64 board Added support for the IIT-HIO-64-128 board Added support for the IIT-HIO-128-256 board Fixed a header alignment issue in the FSUIPC Monitor screen Updated the FSUIPC Monitor window dynamically size to the view Updated the SimConnect Monitor window dynamically size to the view Updated the Internal Variables Monitor window dynamically size to the view Added the ability to delete a module that is not connected. Added the ability to delete a modules configuration Fixed a drawing issue on the header graphics Version 2.3.121 Fixed a bug with the SimAvionics.ini file having sections greater than 32K Added the ability to leave the focus on the target window for a keystroke action Fixed a random initialization issue with the action structures Updated the SimAvionics input / output list Version 2.3.120 Internal build Version 2.3.119 Updated the SimAvionics.INI files to support a default input and output variable type Version 2.3.118 Fixed a cosmetic issue with 7 segment displays showing 0 when no FSUIPC or data was available Version 2.3.117 All program and support modules are not digitially signed Updated the electrical panel module to not zero pad the display Fixed a reading issue with the sysvar.txt file Added the comment data to the pmSystems variable display dialog Added the multiplier to the pmSystems variable display dialog Added the ability to delete actions from any level of a module Updated the electrical panel configuration to match new physical panel design Added the ability to modify the expression in a FSUIPC output action Fixed a display issue in the pmSystems variable chooser. Version 2.3.116 Fixed a minor issues with the electrial panel module Version 2.3.115 Updated the electrical panel default layout Updates to the interfaceIT™ controller library Version 2.3.113 Added complete board configuration to the download import files Version 2.3.112 Fixed the focus on the pmSystems variable chooser dialog Updated the FDS-737NG-ELECT panel module Fixed a visual issue with the description field Addded a new internal system variable "System - Resend Switch States" to send the current switch state Fixed a storage issue with internal variable data value Moved the configuration file location for Windows 7 compatibility Moved the log file location for Windows 7 compatibility Module list now shows configured controllers that are not connected. Fixed an issue with new device addition/removal not being detected correctly Added Project Magenta header Version 2.3.111 Released version Version 2.3.110 Increased the 7 Segment display performance Switched version numbering to .. Updated the size of FSUIPC variables for Sim-Avionics Updated the size of FSUIPC variables for AST Updated controller detection Added 7 Segment display support for FSUIPC offsets Added 7 Segment display support for pmSystems Added 7 Segment display support for AST Added 7 Segment display support for Sim-Avionics Added 7 Segment display support for internal variables Fixed a random hang issue in the USB controller code Added the ability to perform a LED locate on a 7 Segment display Fixed an issue where a blank internal variable name was showing up Added support for internal system variables - "System - LED Test" Version 2.3.0.100 Added the ability to check for updates online (Tools, Check for updates) Added the ability to download and install the updates Fixed a GPF when adding an action to an object not selected Fixed an issue with parsing white space characters from the Sim-Avionics and AST INI files Fixed a GPF with the header drawing. Centering banners without fillers Fixed an issue with the download progress bar Version 2.3.0.89 Added support for the new controller chip Version 2.3.0.80 Adding configuration for new keystroke features Added AST header Version 2.3.0.50 Added Sim-Avionics input / output menu items Added Sim-Avionics INI file Added Sim-Avionics header Version 2.2.0.398 Core USB controller code updated Installer updates Minor enhancements for furture version Version 2.2.0.397 AST Inputs showing FSUIPC config not AST. Version 2.2.0.396 Official release version Version 2.2.0.395 Fixed a bug when support files don't contain a "-" Support files are being drawn in red instead of black Fixed an issue with the logging enablement code Version 2.2.0.389 Changed the file download module to use HTTP vs FTP Resolved some performance issues during file download Added a view function for the file download dialog Updated the graphics in the view function Version 2.1.0.653 Added logging to the startup functions Added logging to output functions Version 2.1.0.647 Added a retry if a server connection reset occurs during file download Updated the download files time to calculate daylight savings time Added a Locate LED via Sweep menu item to the LEDs group Added additional logging Added logging around output functions Fixed an issue with logging across modules Resized some message text areas Updated the download server information to resolve some issues with dsl/cable modem routers Version 2.1.0.613 Updated USB code to resolve issues where inputs were being missed Updated USB code to resolve issues where multiple inputs are being triggered on a single input GPF in LED Scan when a device is removed Version 2.1.0.586 Updated some of the USB code Version 2.1.0 Switches - Virtual toggle switch from momentary added LED Ouptut - Locate LED via a sweep function added LED Output - Inverted option added LED Output - Flash (fast and slow) option added XP style interface New download server Aircraft in download screen are sorted Simconnect support for inputs Graphical enhancements Improved communications with the USB controller General bug files MSI installer package Fixed an issue with sending keystrokes to windows